IceCure ProSense DMS-7063 User Manual Download Page 17

Page: 17 / 132

IceCure™ Medical Ltd.

DMS-7063 rev. C

ProSense™

Confidential

User Manual

US User Manual

Caution

The system will not allow additional treatment when zero procedures are
left to maintenance. Make sure to call

IceCure™

Medical service

representatives in time.

Warning

The system and its accessories are not compatible with magnetic resonance
imaging.

Cyber security

The

ProSense™

Cryoablation System has no Bluetooth or WiFi devices installed and

cannot be connected to any networks or devices using Bluetooth or WiFi protocols.

Caution

Use USB2.0 ﬂash drives only to export reports or log files. Importing any data

or software may corrupt the

ProSense™

Cryoablation System.

Do not connect any other USB devices to the

ProSense™

Cryoablation System

USB port.

Caution

Do not use USB extension cables to connect a USB ﬂash drive to the
ProSense™

Cryoablation System USB port. Using USB extension cables may

cause electromagnetic emissions exceeding regulatory limits.

Caution

Do not connect Ethernet cables to the

ProSense™

Cryoablation System and

do not connect the system to any internal or external networks.
Connecting external equipment to the system can only be done by individuals
trained and certified by

IceCure™

Medical company.

Summary of Contents for ProSense DMS-7063





































































































































Search results

Summary of Contents for ProSense DMS-7063

Reviews:

Brands by name

Popular brands

IceCure ProSense DMS-7063, User Manual

Search results

Summary of Contents for ProSense DMS-7063

Reviews:

Brands by name

Popular brands