Ice vulcan, Service Manual, Page: 92 / 252

Rev AA How to Configure the LPA 5-17
ICE Vulcan Service Manual
Do the following tasks to archive the current parameters:
1
Right click the Archives folder in the left-hand panel.
2
Select the New Save option from the pop-up menu.
3
Change the default Archive name by overwriting the name in the pop up dialog box as
required. Select OK .
A file for the new save appears under the archives folder with a name containing the current
time and date.
4
Once saved, the name of the archive can be changed in the bottom panel, by selecting
the file, changing the name as required and clicking the Apply button.
How to Load a Saved Archive
Do the following tasks to load an archive that was saved previously though PC:
1
Locate the archive in the left panel and right click on it.
2
Choose Load from the pop-up menu.
The archived parameters are displayed on the right-hand pane.
3
Click the Printer icon from the left-hand panel and click the Download
button to load the archive of parameters to the LPA.
Caution
EQUIPMENT DAMAGE. If the CLARiTY user interface is used within a network (Ethernet/IP or
TCP/IP), the “Power over Ethernet“ (PoE) setting must be deactivated for the network being
used. Otherwise, the LAN module of the CLARiTY user interface may be damaged.
Note: To put the new settings into effect, the CLARiTY user interface must be rebooted. If you
have any questions concerning your network, contact your IT administrator.
Creating, Editing and Restoring a USB Archive on a CLARiTY LPA
This procedure describes how to save an archive of a CLARiTY LPA’s settings to a USB
memory stick so that it can be transferred to another LPA, or opened and edited with
CLARiTY Configuration Manager.