29
ICC
At the end of the log, the studio records statistics for the batch update session.
The statistics include the following information:
Devices Discovered
The total number of devices discovered while in batch update mode.
Successful
The total number of devices that were updated successfully.
Failed
The total number of devices that the studio failed to update.
Not Updated
The total number of devices that were not updated. This can occur if a
device is already up to date, or if a device has limited network
connectivity and cannot be updated.
Firmware Updated
The total number of firmware updates performed.
Configuration Updated
The total number of configuration updates performed.
Errors
The total number of devices that encountered an error while being
updated. Note that this does not necessarily imply that the device failed
to update.
8.3
Internal Logic Settings
8.3.1
Fail-safe Values
8.3.1.1
Overview
The gateway can be configured to perform a specific set of actions when network
communications are lost. This allows each address in the database to have its
own unique “fail-safe” condition in the event of network interruption. Support for
this feature varies depending on the protocol: refer to the protocol-specific
section of this manual for further information.
Note that this timeout feature is only used with slave/server protocols: this is not
the same as the Timeout time used for service objects in master/client protocols.
There are two separate elements that comprise the timeout configuration:
•
The timeout time
•
Timeout Object configuration
