92
Wireless Web Interface User’s Manual
21.1.2 Login user authentication method configuration
Click
Management->Switch Basic Configuration->Login user authentication method configuration
to configure the VTY (the login
methods of Telnet and SSH), Web, Console methods and the login user authentication method and priority.
The Login methods include
Console
,
VTY
(including Telnet and SSH),and
Web
. The Authentication method must be
Local
,
Radius
, or
Tacacs
. Local is to use the local database for authentication; Radius is to use the Radius remote authentication server for authentication;
tacacs is to use the remote authentication server for authentication. There is no need to authenticate in console method as
default; the Authentication methods of
VTY
and
Web
are
Local
authentication by default.
Example: Configure a user who uses the Radius remote authentication server for authentication with Telnet and SSH.
Note: The corresponding user authentication method can be configured for Console, VTY, and Web, respectively. The authentication
method can be selected as any combination of
Local
,
Radius
, and
Tacacs
. When adopting the combination authentication methods, the
priority of authentication method 1 is highest and then falls in descending order. If the authentication method with higher priority is
successful, the user will be allowed to log in with those credentials and the subsequent authentication methods will be ignored.
