5
Wireless Web Interface User’s Manual
1.2 Web interface introduction
1.2.1 Log in to the Link2000ACS
Open the Web browser, type the IP address
192.168.
1.1
in the address bar, and press
ENTER
to open the login page for the Link2000ACS.
Type the username and password (the default username is
admin
, and the password is
admin
), click
Login
, or press
ENTER
to open the
Web Configuration
page. The figure is shown as follows:
1.2.2 Web interface introduction
Upon logging in, the
dashboard
will appear, showing the basic information of the current Link2000ACS and the managed AP status.
Chapter 2 provides a detailed introduction to the dashboard.
At the top of the screen are tabs for each functional module. Click the corresponding tab to configure the wireless or wired functions.
