111
Wireless Web Interface User’s Manual
21.6.1 Debug command
Click
Management->Maintenance And Debugging Command->Debug Command
to open the
Configuration
page and configure basic
host configuration, PING, and traceroute.
1. Basic configuration – configures the mapping between the switch and the IP address.
Example: Type the Host name as
AC
and the IP address as
192.168.1.1
. Select Operation
Add
and then click
Apply
.
2. PING
The entries are as as follows:
•
Host name – name of the host
•
IP address – the destination IP address
Example: Type the IP address as
192.168.1.80
, and then click
Apply
.
