iCarsoft BMM V3.0, User Manual

Page: 46 / 55

EN
42
6.7.2 Unit of Measure
On Tool Setup, use DOWN button to select Unit of Measure and press
ENTER, where you can choose Metric or Imperial.
6.7.3 Buzzer
On Tool Setup, use DOWN button to select Buzzer and press ENTER,
where you can turn the buzzer ON or OFF.
6.7.4 LOG
On Tool Setup, use DOWN button to select Log and press ENTER, where
you can turn the Log ON or OFF.
Set to ON, the log function is enable. RECORD function will be disable.
The log function will be disable after reboot.
The log function is used to feed-back data to manufacturer,
the log file will be saved to the path MSDIAG / LOG / on memory card.
6.7.5 Clear Data
On Tool Setup, use Down button to select clear data and press ENTER.
You can clear the saved logs or clear the saved records.
6.7.6 Factory Data Reset
On Tool Setup, use Down button to
select Factory Data Reset and press
ENTER, where you can get a note
“This
operation will reset all user data. Do you
want to continue”. You can choose yes or
no.