iCarsoft BMM V3.0, User Manual

Page: 43 / 55

EN
39
4) Until the screen prompts that the operation is completed, press the OK to
exit.
6.2.18 Seat
After repairing or replacing the seat position drive motor, it is necessary to
perform relevant functions for calibration (Take Jaguar as a sample).

Driver's Seat Calibration:
The following routine will restore all the seat axis position values to
default for the driver's seat module.
1) Select "Seat" icon in service function icon, Select the correct vehicle
according to the on-screen instructions.
2) Calibrate the driver's seat.
3) The program will restore all seat axis position values of the driver's seat
module to the default values. Reset all adaptive values.
4) Make sure that the area around the seat is free of any objects that will
hinder full movement and do not sit on the seat during operation.