iCanView270 User’s Guide
Field/Button
Sub Field
/Button
Description
Channel
Selection
Not applicable.
Channel
Sensitivity
Set the sensitivity in motion detection for each channel. 1 is the most
sensitive, and 10 is the least sensitive.
Set up to 3 the motion detection zone
Region 1, 2, or
3
Enable each zone by checking the box at the left of each Region.
. To set the region,
1. Click
on
START
and click on a box overlaid on the video
2. Click
on
END
and click on a box overlaid on the video.
3. The defined motion detection zone will be indicated with
corresponding colors.
Legend of the color :
red(region 1),
green(region 2),
blue(region3).
START
Enable selection of rectangular zone start.
END
Enable selection of rectangular zone end.
SELECT
Click on this button and click on desired rectangle to add or delete the
rectangular region to the motion detection zone.
Percentage
This value controls the sensitivity of each region.
1 is the most sensitive and 100 is the least sensitive
Motion Region
Setup
RESET
Clears the start & end point to (0,0) & (0,0)
SAVE
Save the setup parameters.
Rev.2.0 (Nov.2007)
37