iCanTek iCanView270, User Manual, Page: 30 / 56

iCanView270 User’s Guide
Username
Administrator
password :
Admin password. The default password is “ dw2001 ”.
Administrator
Confirm
Password
Enter the password once more to confirm the password.
Add User
Username
Enter the user ID you want to add. Up to 100 users are supported by
iCanView270.
Add User
Password
Enter the user password.
Add User
Attribute
You can set different system resource access capabilities for each of the
users.
z
Attributes are Audio, Bi-directional Audio and Pan/Tilt control.
z
For example, if you want a specified user to hear the audio from
the iCanView270, check Audio in the check box.
Administration
User List
You can list “user ids” and “ their attributes” here.
z
format : user id[A, BA, P] :
„
A – Audio,
„
B – Bi-directional audio,
„
P – PTZ, attribute.
You can delete specific user by clicking the DELETE button.
YES
SAVE
If you want to restrict viewing access to the iCanView270, check at the
box left to Yes and click on Save . Users need to input ID and password
to connect to iCanView270 in viewing mode in a pop up window as
shown below..
Fig. 5-6. User Authentication in iCanView270
Authentication
for Viewing
If No, default
attribute
If you uncheck for the Authentication for Viewing, all users can access
the iCanView270 with the same attribute set here. Checked attributes
are enabled. Click “ Save ” to save the attribute.
Rev.2.0 (Nov.2007) 30