IC Realtime HD-PTZ-12X-C, User Manual

Page: 19 / 35

1
2
PRESET
AUTO PAN
AUTO SCAN
AUTO TOUR
PATTERN
IDLE MOTION
NEXT PAGE
BACK EXIT
PRIVACY MASK
PTZ SPEED
：
2
SET ZERO
POWER UP
MENU PASSWORD
MENU IDLE
：
1M
PTZ AUTO STOP
：
15S
BACK EXIT

HUE
: It is to set picture hue. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.

BRIGHTNESS: It is to set picture brightness. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.

SATURATION: It is to set picture saturation. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.

CHROMA SUPPRESS: It is to set picture color control. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.

GAMMA: It is to set picture gamma. It includes the fourth menu. Move the cursor to current item an
then click confirm button to go to the submenu.

CONTRAST: It is to set picture color contrast. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.

STYLE: It is to set video style. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.

BACK: Go back to previous menu.

EXIT: Log out system menu.
3.4.4 Function Setting
Figure 3-18 Function setting Figure 3-19 Next page
Please go back to main menu and move the cursor to FUNCTION SETTING, click confirm button. You
can see the above interface.

PRESET: It is to set preset. Move the cursor to PRESET and then click confirm button to go to the
third submenu.

AUTO PAN: It is to set pan. Move the cursor to AUTO PAN and then click confirm button to go to
the third submenu.

AUTO SCAN: It is to set scan number, speed and etc. Move the cursor to AUTO SCAN and then
click confirm button to go to the third submenu.

AUTO TOUR: It is to set tour number, tour operation and etc. Move the cursor to AUTO TOUR and
then click confirm button to go to the third submenu.

PATTERN: It is to set pattern number and etc. Move the cursor to AUTO PATTERN and then click
confirm button to go to the third submenu.

IDLE MOTION: It is to set idle operation, idle time and etc. Move the cursor to IDLE MOTION and
then click confirm button to go to the third submenu.

NEXT PAGE: It includes: PRIVACY MASK, PTZ SPEED, SET ZERO, POWER UP and etc. Move
the cursor to the item and then click the confirm button to set.