16
3 Installation and Connections
Note: All the installation and operations here should conform to your local electric safety
rules.
3.1 Check Unpacked DVR
When you receive the DVR from the forwarding agent, please check whether there is any visible
damage. The protective materials used for the package of the DVR can protect most accidental
clashes during transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list (Remote control is optional). Finally you can
remove the protective film of the DVR.
Note
Remote control is not a standard accessory and it is not included in the accessory bag.
3.2 About Front Panel and Rear Panel
For detailed information of the function keys in the front panel and the ports in the rear panel,
please refer to the appendix for detailed information.
The model in the front panel is very important; please check according to your purchase order.
The label in the rear panel is very important too. Usually we need you to represent the serial
number when we provide the service after sales.
3.3 HDD/SIM Card Installation
3.3.1
HDD Installation
Important
Shut down the device and unplug the power cable before install/remove the HDD.
The e-lock on the right side of the front panel shall be unlocked when you install/remove the
HDD. Please lock the button before you boot up the device.
The unit you received has no HDD. Please remove the HDD box from the device and then follow
the steps listed below to install.
1) The HDD box and the parts are shown as below. See Figure 3-1. It includes bottom board of
the HDD box and screws.
