5
4
Menu
4.1
HAVR Settings
This HDAVS camera series can adjust OSD menu via coaxial control. After connected the
camera to the HDAVS series HAVR, from Main Menu->Setting->System->PTZ, you need to
select the channel number for access and set control mode as HDAVS and the protocol as
ICR-SDI. Click
“Save” button to save current setup. See Figure 4-1.
Figure 4-1
4.2
Menu Operation
Click the right mouse button and select
“PTZ Control”, then you will see the “PTZ Setup” menu,
which is as shown in Figure 4-2 and Figure 4-3.
Figure 4-2
