manualshive.com logo in svg

IC Realtime 1U POE NVR Series, User Manual, Page: 52 / 291

Share
Download
IC Realtime 1U POE NVR Series User Manual Download Page 52

Figure 4-23

Step 1

Check the box to enable P2P function.

After the P2P function is enabled and connected to the Internet, the system will collect
your information for remote access, and the information includes but not limited to
email address, MAC address, and device serial number.

Step 2

Click the

Apply

or

Next

button to complete setup.

The status is online if the P2P registration is successful and has internet connectivity.

4.1.4.3.2 Mobile App Registration

You can find these same steps in a video on our YouTube channel or on our
support center.

YouTube Link:

https://www.youtube.com/c/ICRealtimeOfficial

Help Center:

https://www.icrealtime.com/support

Step 1

On your mobile device, go to the app store and download IC View or ICRSS Pro.

Step 2

On your cell phone, open the application and then tap the

Home

icon at the top left.

Step 3

The home menu will be displayed. Follow the steps below to
add your unit.

41

Summary of Contents for 1U POE NVR Series




































































































































































































































































































Reviews:

No comments