IC Realtime 1U POE NVR Series, User Manual, Page: 51 / 291

Table 4-6
Parameter Description
IP Version
There are two options: IPv4 and IPv6. The system
supports these two IP address formats
Preferred DNS server DNS server IP address.
Alternate DNS server DNS server alternate address.
MAC Address Displays the MAC address of the Device.
DHCP
Enable/disable the DHCP function.
The IP address, subnet mask and default gateway are not
available for configuration once DHCP is enabled.
● If DHCP is valid, the obtained information will display
in the IP Address box, Subnet Mask box and
Default Gateway box. If not, all values show 0.0.0.0.
● If you want manually configure the IP information,
disable the DHCP function first.
● If PPPoE is enabled and is successful, the IP
address, subnet mask, default gateway, and
DHCP are not available for configuration.
4.1.4.3 P2P
P2P is used for easily viewing your system remotely. It can be used with our Desktop Software
called SmartICRSS or it can be used on our mobile apps called IC View or ICRSS Pro.
To use this feature simply make sure it is enabled and the unit has an internet connection.
On your remote device (Cellphone or Computer) open our application. Go to the Device menu
and register a new device via the P2P method. Either manually type in the SN (Serial Number)
of your unit or scan the generated QR code from the menu. Enter your systems credentials
and you are done.
Before using the P2P function, make sure that the NVR has connected to the internet.
4.1.4.3.1 Local Operation
The P2P interface will be displayed in the wizard after the Network IP settings. Or you
can manually navigate to the menu. See Figure 4-23 for P2P interface.
Select Main Menu > Network > P2P , to navigate to the P2P interface.
40