IC Realtime 1U POE NVR Series, User Manual, Page: 206 / 291

Parameter Description
Snapshot
Select the Snapshot check box to take a snapshot of the selected
channel.
To use this function, select Main Menu > Advanced Settings >
Camera Configuration > ENCODE > Snapshot , in the Mode
list, select Event (Trigger) .
Log
Select the check box, the NVR device records the alarm information in
the log when an alarm event occurs.
Alarm Tone
The NVR will play a specified audio file when the event occurs.
To enable, check the box and then select the corresponding audio file
from the drop-down list.
Refer to "4.18.1 File Management" to add audio files.
Buzzer ● Activates the onboard buzzer when an event occurs.
Step 3 Click Apply .
4.8.9 Disarming
This section allows you to disarm all alarm linkage actions as needed.
Step 1 Select Main Menu > Advanced Settings > Alert Center > Disarming .
Step 2 Click to enable disarming.
Figure 4-194
Step 3 Select alarm linkage actions to disarm.
All alarm linkage actions will be disarmed when you select All .
Step 4 Click Apply .
195