manualshive.com logo in svg

IC Realtime 1U POE NVR Series, User Manual, Page: 189 / 291

Share
Download
IC Realtime 1U POE NVR Series User Manual Download Page 189

Figure 4-181

Step 2

Select the alarm mode of the alarm output channel.

● To clear all alarm output statuses, click

OK

in the

Alarm Reset

section.

● View the alarm output status, click on the

Status

column.

Step 3 Click

Apply

.

4.8.5 Video Detection

The Video Detection function (motion detection) detects pixelation change. If the live video has
changed considerably (such as moving objects, or if the video is distorted), the NVR can trigger
the corresponding event activation operations.

Select

Main Menu

>

Advanced Settings

>

Alert Center

>

Video Detection

>

Motion Detection

,

here you can view the Video detect interface. There are five detection types: motion detection,
video loss, tampering, scene changing, and PIR alarm.

4.8.5.1 Motion Detection

If a moving object appears or moves fast enough to reach the preset sensitivity value, the NVR
will trigger an event.

178

Summary of Contents for 1U POE NVR Series




































































































































































































































































































Reviews:

No comments