IC Realtime 1U POE NVR Series User Manual Download Page 185

Page: 185 / 291

Figure 4-178

Step 2

In the

Type

list, select the event type; In the

Start Time

box and

End Time

box,

enter the desired time.

Step 3

Click

Search

The search results will be displayed.

Step 4

Click

Backup

to back up the search results into an external storage device.

● Click

to play the recorded video of the alarm event.

● Double-click a log or click Details to view the detailed information of the event.

4.8.2 Alarm Monitor

This section allows you to live view NVR and remote camera alarm events.
Select

Main Menu > Advanced Settings > Alert Center >Alarm Monitor.

The interface will be

displayed. See Figure 4-179.

Here, you select the event types you want to monitor. When the selected event type occurs, it
will appear in the events list on the right side.

174

Summary of Contents for 1U POE NVR Series




































































































































































































































































































Search results

Summary of Contents for 1U POE NVR Series

Reviews:

IC Realtime 1U POE NVR Series, User Manual, Page: 185 / 291

Search results

Summary of Contents for 1U POE NVR Series

Reviews: