IC Realtime 1U POE NVR Series, User Manual, Page: 175 / 291

Parameter Description
PTZ Linkage
Select the check box and click Setting to select the channel and
PTZ action. When an event occurs, the NVR will have the
selected channel perform the corresponding PTZ action. For
example, activate the PTZ in channel one to turn to the preset
point X.
● Tripwire events only supports PTZ preset point activation.
● Corresponding PTZ actions must be configured prior,
see "4.4.4 Calling PTZ Functions".
Tour
Click to select the check box and then select the
channel(s) for tour. When the event is triggered, the
local interface of the NVR device will display the
selected channel(s) on the screen.
● It is recommended to set the interval and tour mode
beforehand. See "4.17.2 Tour".
● After the tour ends, the previous screen split mode
will resume.
Picture Storage
Select the Snapshot check box to take a snapshot of the
selected channel.
To use this function, select Main Menu > Advanced Settings >
Camera Configuration > Encode > Snapshot , select Event in
Type list.
Buzzer
Select the check box to activate the onboard buzzer when an
event occurs.
Alarm Tone
The NVR will play a specified audio file when the event occurs.
To enable, check the box and then select the corresponding
audio file from the drop-down list.
Refer to "4.18.1 File Management" to add audio files.
Step 3 Click Apply .
4.7.3 Database
Creating a Face database allows the Face Recognition algorithm to compare faces detected in
the live video to the faces stored in the database. Compared faces can be set with a similarity
threshold and can trigger an event if the faces detected meet (or do not meet) the similarity
threshold or are not in the database.
For privacy reason, the sample images are pixelated.
164