Passenger Control
Electronic Safety Messages
The electronic messaging system is an electronic rear facing
LED sign that provides two distinct safety messages to alert
drivers when the bus is stopping or stopped. When the AMBER
warning lights are activated, the alternating
Caution - Stopping
LED message flashes.
When the RED warning lights are activated and the stop arm is
deployed, the alternating
Stop – Do Not Pass
LED message
flashes. See the description of the eight-lamp AMBER and RED
warning lights below.
Eight-Lamp AMBER and RED Warning Lights
The eight-lamp AMBER and RED warning system is made up of
four AMBER (two front and two rear), and four RED (two front
and two rear) flashing lights, and is part of the warning flasher
system.
The AMBER warning lights alert the public of the intent to stop
and load / unload students onto / from the bus. The RED warning
lights and the stop arm are intended to warn the public that
students are boarding or leaving the bus.
The warning indicator control is located on the right-side of the
steering wheel.
Rocker Switches (If Equipped)
NOTE: These switches can be located on the left-side or
right-side console switch panel.
64
Summary of Contents for Gasoline CE Series
