IC Bus Gasoline CE Series, Operation And Maintenance Manual

Page: 73 / 241

Lights
Lane Change
Some switches include a lane change feature, which allows you
to signal your intention to change lanes without locking the switch
into the full turn position. Move the turn signal lever, up or down,
to the point where resistance to movement is felt. The turn signal
lever returns to the OFF position when released.
HIGH / LOW Beam
Pull the turn signal lever past the click position, the lights switch
to high-beam position. Pull again to return to low-beam.
Strobe Light
The optional strobe light comes on automatically unless
operated by a separate switch. Check your state regulations on
strobe light use.
Exterior Lamp Check
Switch Location
The switch to activate and deactivate the exterior lamp check
system is one of the right-side user switches located below the
instrument panel gauge cluster.
Function
The exterior lamp check is a feature that allows the driver to
conduct the exterior lamp check by themselves. The exterior
lamp check is included in the pre-trip inspection section of this
manual. While the system is active, the driver can exit the bus
and visually inspect all lights on the exterior of the vehicle for
proper operation.
59