Lights
Panel Lighting Control
The PANEL rocker switch controls the panel lighting
brightness.
Press the upper portion of the rocker
switch to increase the brightness. Press the lower
portion of the rocker switch to dim the brightness.
Interior (Dome) Lights
For control of inside lights, see the
Driver Controls
section.
Hazard Warning Light Switch
1.
Hazard warning light switch
Use the hazard warning light switch in an emergency to warn
traffic of vehicle breakdown, approaching danger, the vehicle is
in tow, or is operating at a reduced speed. The hazard warning
lights can be operated with the ignition in any key switch position.
Press the button to activate all hazard flashers simultaneously.
Press the button again to turn the flashers OFF.
Turn Signal Switch
The turn signal switch is mounted on the left-side of the steering
column below the steering wheel. The green directional indicator
lights, which are activated by the turn signal switch, are located
on the instrument panel.
Signaling for a Turn
Move the turn signal lever up or down to the full turn position
which is past the point of resistance.
The turn signal
automatically cancels if the steering wheel is turned through a
large enough degree.
58
Summary of Contents for Gasoline CE Series
