IC Bus Gasoline CE Series, Operation And Maintenance Manual, Page: 48 / 241

Instrumentation
Quadrant 2 – Display
Messages
Description Flash (Yes / No)
Warning Indicator
Association
Calibration Ended
Message is displayed when vehicle speed is less than 2
mp/h (3 km/h) and the operator has requested Calibrate
Compass in the current ignition cycle.
No No
Declination Zone
Message is displayed only when vehicle speed is less than
2 mp/h (3 km/h).
No No
Warning Messages
In addition to the Diagnostic Trouble Codes (DTC), the digital
display will display a warning message whenever an engine
indicator is illuminated. This warning message will be toggled
with the normal DTC as follows:
Amber Warning Lamp indicator: WARN ENGINE message
Red Stop Lamp indicator: STOP ENGINE message
The following chart provides the warning messages that are
displayed along with corresponding Instrument panel gauge
cluster indicators.
Warning indicator Warning Message
Red Stop Lamp STOP ENGINE
Amber Warning Lamp WARN ENGINE
Quadrant 3: Outside Temperature and Compass Displays
(If Equipped)
The optional Outside Temperature and Compass Heading is
displayed in Quadrant 3. Typical displays for Temperature and
Compass Heading are listed in the following table. The display
provides both the outside ambient temperature and the relative
direction of the vehicle within a particular geographical zone.
See below for details of calibration and use.
Vehicle must be moving to acquire an accurate temperature.
Quadrant 3 –
Display Messages
Description
Outside
Temperature and
Compass Heading
Display Format:
34