IC Bus Gasoline CE Series, Operation And Maintenance Manual, Page: 33 / 241

Vehicle Inspection Guide
Emergency Exits and Equipment
Location Description
Roof Hatch
Inspect the roof hatch daily for proper opening, buzzer warning, if supplied, and operating instruction decal
attachment. Make sure the emergency hatch is completely closed and secure.
Emergency Exits
Check all emergency exits every day for proper opening, buzzer warning, and operating instruction decal
attachment. Check to see that all emergency exit doors can be opened, and that they are firmly closed. Make
sure all emergency door release bars are properly secured, and the emergency exit t window handle is
properly latched.
Warning Lights, Stop Arm, Crossing
Gate, and Entrance Door Check
• Check to see that the AMBER and RED warning lights are operating properly. To check these lights
use the Exterior Lamp Check procedure in the
Lights section of this manual.
• Verify the Stop Arm and Crossing Gate are working properly and extend completely
• Verify the entrance door is opening and closing properly.
• Verify the flasher warning lights and stop arm are working properly with the flasher switches and
entrance door operations. Check to see that the AMBER Warning Lights are flashing. When the
entrance door is opened, check to see that the AMBER Warning Lights stop flashing and the RED
warning lights begin flashing, and Crossing Gate and Stop Arm are extended. Close the entrance door
and observe that flasher warning lights go OFF. There is an optional feature that will automatically turn
OFF the pupil warning lights after the bus has started to move.
Emergency Equipment
If equipped / required by state law, check to make sure that the fire extinguisher, reflective triangles, first aid
kit and body fluid clean up kit are in place and secure.
19