Wheelchair Instructions and Information
Retracting and Stowing Operation
After using the wheelchair lift, to load passengers, before you
can start the bus in motion, (shifting the gearshift lever out of the
Park [P] position), retract and stow the wheelchair lift and then
close the lift door (LIFT DOOR gauge luster indicator should be
turned OFF).
When the wheelchair lift has been safely stowed (according
to the wheelchair lift manufacturer's
Operation Manual
instructions), the bus can be safely moved as follows:
•
Depress the service brake pedal and press and hold
the button on the gearshift lever handle and move the
gearshift lever from Park (P) to Reverse (R) or Drive (D)
position, and then release the button.
•
Release the parking brake (push and release the parking
brake knob), lift foot from service brake pedal, and then
slowly press the accelerator pedal (the instrument panel
gauge cluster PARK indicator should be OFF).
103
Summary of Contents for Gasoline CE Series
