IC Bus Gasoline CE Series, Operation And Maintenance Manual, Page: 106 / 241

Seating and Safety Restraints
Location and Use of Tether Anchors (SafeGuard ® XChange
Bus Seats)
SafeGuard ® XChange bus seats are equipped with tether
anchors for add-on child seats.
1. Tether anchor
Tether anchors are located on the aisle side rear pedestal and
on the seat wall mount bracket rear edge.
1. Strap (Free End)
2. Tether anchor
To attach an add-on child seat tether, route the tether on the
child seat over the top of the SafeGuard
®
XChange bus seat.
Extend the tether and connect the snap hook to the nearest
tether anchor provision at the lower rear of the seat. Adjust the
tether to a snug and tight fit by pulling on the free end of the strap
at the adjuster.
92