IC Bus CE Series, Operation And Maintenance Manual

Page: 108 / 239

Seating and Safety Restraints
Tether anchors are located on the aisle side rear pedestal and
on the seat wall mount bracket rear edge.
Installing Tether
1. Strap (Free End)
2. Tether Anchor
To attach an add-on child seat tether, route the tether on the child
seat over the top of the belted BTI bus seat. Extend the tether
and connect the snap hook to the nearest tether anchor provision
at the lower rear of the seat. Adjust the tether to a snug and tight
fit by pulling on the free end of the strap at the adjuster.
96