IC Bus CE Series 2020, Operation And Maintenance Manual

Page: 97 / 287

Passenger Control
Press the RED OVERRIDE button twice to turn OFF the RED
warning lights while the door is open and the bus is not moving.
The RED warning lights can also be turned OFF while traveling
at a speed lower than the preset road speed parameter with the
door closed.
Non-Sequential System
With the master flasher switch in the ON position, press the
FLASHER ON / OFF button to engage the AMBER warning
lights. (If the master switch is not turned ON, there will be no
activation of the lights or stop arm.)
The AMBER warning lights change automatically to the RED
warning lights when the entrance door is opened.
The RED warning lights will deactivate when the doors are
closed.
NOTE: If the door is reopened, the RED lights will reactivate
without pressing the FLASHER ON / OFF or the RED
OVERRIDE buttons.
To turn OFF the RED warning lights while the door is open and
the bus is not moving, press the RED OVERRIDE switch twice,
or turn OFF the master flasher switch.
WIG WAG Warning System
The optional Wig Wag is a device for flashing the right
and left headlights alternately at a preset rate of about
75 times per minute. If the low beams are on, the
high beams will alternate and vice versa. If the driving
lights are on, the low beams will alternate.
Flashing Stop Arm
Used to warn the public that students are boarding or
leaving the bus.
83