Passenger Control
The AMBER warning lights alert the public of the intent to stop
and load / unload students onto / from the bus. The RED warning
lights and the stop arm are intended to warn the public that
students are boarding or leaving the bus.
The warning indicator control is located on the right-side of the
steering wheel.
Optional Rocker Switches
NOTE: These switches can be located on
the left-side or right-side console switch
panel.
NOTE: These rocker switches are an
optional alternative to the steering wheel
controls.
When this option is chosen,
the cruise / throttle switches move to the
steering wheel location.
Sequential System
Press the FLASHER ON / OFF button to engage the AMBER
warning lights.
The AMBER warning lights change automatically to the RED
warning lights when the entrance door is opened.
The RED warning lights will deactivate when the door is
closed and the vehicle travels faster than a preset road speed
parameter.
The RED warning lights will deactivate when the door is closed
when the bus is not moving (if equipped).
NOTE: If the entrance door is reopened without pressing the
FLASHER ON / OFF or the RED OVERRIDE buttons, the RED
warning lights will not activate.
82
Summary of Contents for CE Series 2020
