Passenger Control
SECTION 6 — PASSENGER CONTROL
Door Opening / Closing
Opening / Closing
WARNING
To prevent personal injury and / or death, or
damage to property, ensure that each child, and
all of their clothing, backpacks, bookbags and
other belongings are clear of the vehicle before
the door is closed and the bus operated. Consult
with local and state authorities for specific
procedures that may apply for children entering
or exiting buses.
NOTE: Due to various state and local requirements, the
location of the entrance door OPEN / CLOSE switches
shown may be different than your vehicle.
The entrance door OPEN / CLOSE button is located on the
steering wheel in the left button position.
Press the top of the button to open the entrance door.
Press the bottom of the button to close the entrance door.
Two-Position Door Switch
The optional two position door switch is located on the left-side
or right-side console switch panel.
With the ignition in the accessory or ignition position, the
entrance door can be opened by moving the switch to the OPEN
position.
With the ignition in the accessory or ignition position, the
entrance door can be closed by moving the switch to the CLOSE
position.
79
Summary of Contents for CE Series 2020
