IC Bus CE Series 2020, Operation And Maintenance Manual

Page: 126 / 287

Seating and Safety Restraints
1. Tether anchor
Tether anchors are located on the aisle side rear pedestal and
on the seat wall mount bracket rear edge.
1. Strap (free end)
2. Tether anchor
To attach an add-on child seat tether, route the tether on the
child seat over the top of the SafeGuard
® XChange bus seat.
Extend the tether and connect the snap hook to the nearest
tether anchor provision at the lower rear of the seat. Adjust the
tether to a snug and tight fit by pulling on the free end of the strap
at the adjuster.
Cushion Release Latch
WARNING
To prevent personal injury and / or death, or
damage to property, ensure seat belts and
equipment are held out of the way when lowering
the cushion to seated position. Keep hands and
feet clear while lowering the seat cushion.
Rear Latching
1. Latch
2. Seat bottom
112