IC Bus CE Series 2020, Operation And Maintenance Manual

Page: 107 / 287

Seating and Safety Restraints
SECTION 7 — SEATING AND SAFETY RESTRAINTS
Driver Seat Adjustment
WARNING
To prevent personal injury and / or death,
or damage to property, always use occupant
restraint system when vehicle is moving. Any
location in the vehicle not equipped with a
seat belt, bunk restraint belts, or sleeper berth
restraint webbing should not be occupied when
the vehicle is being operated.
WARNING
To prevent personal injury and / or death, or
damage to property, do not adjust driver's seat
while vehicle is moving. The seat could suddenly
or unexpectedly move, causing the driver to lose
control of vehicle.
WARNING
To prevent personal injury and / or death, or
damage to property, use caution and reduce
speed when operating this vehicle over rough
roads or surfaces as this can cause loss of
vehicle control.
Properly adjusted seats and
seating systems may not compensate completely
for severe road conditions.
Ensure that head
clearance will be maintained during all road
conditions, as the seat may move up and
decrease the available space.
WARNING
To prevent personal injury and / or death, or
damage to property, set the parking brake and
place transmission in park (if available), or
neutral prior to exiting the driver seat.
NOTE: This bus may be equipped with an optional driver
seat that may be different than the one described in this
manual. If so, refer to the seat manufacturer’s manual for
proper operation and maintenance.
93