ic audio GmbH
Boehringerstraße 14a; D-68307 Mannheim; Germany
Fon: + 49(0) 621 / 77096-0; Fax: + 49(0) 621 / 77096-26
E-Mail: [email protected]; www.ic-audio.com
DT
26
MT-AMP 1000
ic audio
25. Technische Daten
Power Source
115/230V AC , 50/60 Hz, 24V DC
Rated Output
240W
Amp Type
Analog
Power Consumption
720W
MIC:
60 - 15KHz +1/-3dB
Frequency Response
AUX:
50 - 20KHz +1/-3dB
Distortion
1% rated output power
MIC 1 - 6:
1.5mV,600Ohm,balanced
XLR terminal/RJ45 terminal(MIC 1)
LINE 1 - 2:
200mV,600Ohm,balanced
XLR terminal
MIC 5/LINE 1, MIC6 /LINE 2 switchable
AUX 1:
500mV, 10kOhm,unbalanced
XLR terminal
AUX 2:
500mV,10kOhm,unbalanced
RCA terminal
AUX 3:
300mV,10kOhm,unbalanced
RCA terminal
Power In:
1V, 600Ohm, unbalanced
RCA terminal
Callstation:
1V, RJ45 terminal
TEL/EMEG:
100mV, 600Ohm, balanced
Input
Wall Control Panel:
1V, RJ45 terminal
100V Input
100V, balanced Input
Ext Amp in:
100V input
REC Out:
1V, unbalanced, RCA Jack.
PRE Out:
1V, unbalanced, RCA Jack.
Ext. Amplifier XLR out:
1V, balanced, XLR Jack.
MOH 0/8Ohm:
8Ohm,1W, unbalanced
MOH 600Ohm:
600Ohm, output,1Vrms, balanced
Direct Output:
100V - 70V - 8Ohm - 0.
To PEX-8000:
RJ45 terminal
Output
Z1 - Z6 Output:
100V - 0
Phantom Power
ON / OFF,MIC 1 - 6, 16V dc.
MIC 1 - 4:
> 60 dB
TEL:
> 70 dB
MIC 5 - 6:
> 60 dB
LINE 1 - 2:
> 70 dB
S/N Ratio
AUX 1 - 3:
> 75 dB
Tone Control
Bass: ±10dB, 100Hz, Treble: ±10dB, 10KHz
Wall control panel:
RJ45 socket , operate under PX-8240
selector setting at “REMOTE”
Remote Power:
Dry contact terminal
Open Voltage: 24V DC
Control Input
(when the unit's power is at "OFF" position)
Short circuit to switch ON the unit.
