3. Introduction
- MT-AMP 1000 is a 6-Zone mixer amplifier.
- With MT-AMP 1000 and the zone expansion units MT-EXP 1000 you can do installations with 54 zones.
- You can manage different modes for background music (BGM) and paging by the callstations.
- 6 microphone inputs can manage 4 different modes of priority
- An optional music source is available by the MT-CDT-USB, a CD/MP3-Player, SD-Card-Reader, USB-
and Tuner-module in one unit.
- A built-in pilot tone detecting system is able to check the function of the amplifiers.
4. Features
- MT-AMP 1000 Six-Zone Mixer Amplifier has 6 MIC input.
- Each microphone has individual volume control
- Each MIC has independent HI/LO control VR
- MIC5/ Line 1, MIC6/ Line 4 can be selected for different level input signal.
- The unit has REMOTE, SOURCE and AUX1, 2, 3 selection key, it also has independent volume control
and HI/LO control VR.
- Z1~Z6 has independent key and LED indicator. Each zone has attenuator switch to control output level.
- The unit has All Zone control key, it can manage all Zone's output.
- The VU meter indicates the output signal level.
- MIC1 has RJ45 terminal for the connection of the callstation MT-PM-01
- Telephone emergency has the top priority and operating precedence as follows: Tel/EMG > Paging
Station > Microphone > Source, Aux1~3, wall control panel
- Priority Mode Setting of microphone has four different priority modes.
- 20KHz pilot tone switch to switch on/off pilot tone, and spare amplifier function will on/off accordingly.
- System mode setting to define call amplifier operation.
- Power Remote contact to trigger “ON” amplifier when the amplifier is under power switch “OFF” state.
ic audio GmbH
Boehringerstraße 14a; D-68307 Mannheim; Germany
Fon: + 49(0) 621 / 77096-0; Fax: + 49(0) 621 / 77096-26
E-Mail: [email protected]; www.ic-audio.com
EN
4
MT-AMP 1000
ic audio
