Last update:
2022-06-13
www.ibspe.com
User Manual |
P8
11
Connecting to the ECL202
Connection
Description
Notes
Top-Rear Connector: Remove Offset
No Connection
No Connection
Remote
+ Opto-isolator input for
Remote Offset function
15-24 VDC Activates the function
Remote Offset
−
−
Opto-isolator input for
Remote Offset function
Top-Front Connector: Remote Setpoint and Switch Output
Remote Threshold
−
−
Opto-isolator input for
Setpoint function
15-24 VDC Activates the function
Remote Thr
+ Opto-isolator input for
Setpoint function
Switch
Contact 1 of switched output
Open: 30 VAC/60 VDC max
Closed: 250 mA max
Switch
Contact 2 of switched output
Bottom-Front Connector: Power and Analog Output
Power In
Input Power
Internally connected together
Power Ground
Power Ground
Output Signal Ground
Reference for output signal voltage
Output Signal
Output signal voltage
0-10 VDC
Bottom-Rear Connector: Bandwidth
(ECL202 Only)
Bandwidth Selected
Common point for bandwidth
selection jumper
100Hz, 1kHz, 10kHz
Bandwidth selection, connected to
Bandwidth Selected
None = 15 kHz
