Last update:
2022-05-31
www.ibspe.com
User Manual |
P4
3
ECL150 and ECL150e
The ECL150e is identical to the ECL150 except that resolution is limited to a best case of 0.3 μm. For this reason,
the ECL150e does not require an export license. For details on export restrictions, please refer to
www.lionprecision.com/exports-and-the-ear99-classification/
This manual will only refer to the ECL150, but all instructions apply to the ECL150e.
3.1
Description
The Lion Precision ECL150 Eddy-Current Displacement Sensor provides up to eight channels of high-resolution,
noncontact displacement measurement of a conductive target. The system consists of driver electronics and
probes calibrated for a specific material, range, and ECL150 channel. The ECL150 provides linear ±5 V outputs
for each channel; more positive output voltage indicates the probe is further from the target. The calibration
information is detailed on a calibration certificate which is shipped with the system.
4
Quick start instructions
1.
Connect the probes to the matching channels on the ECL150.
NOTE: Each channel is calibrated to a specific probe identified by a channel number marker on the probe cable.
The probe serial numbers are listed on the labels on the end of the electronics enclosure.
2.
Connect the output to a monitoring device.
3.
Connect then apply power.
4.
Adjust the probe position so the Range Indicator shows green
5
Led range indicator
The Range Indicator monitors and displays the probe position within its calibrated
range. The indicator is green when the probe is in the calibrated range and red when
out of the calibrated range. If the Range Indicator is red, the output voltage is not a
reliable measurement.
