46
47
9. In case problems occur
Problem
Possible Cause
Solution
The Kalm Patch is switched
on, but does not function.
The battery is not inserted.
Insert the battery
.
The battery is empty
.
Replace the battery
.
The Kalm Patch is defective.
Mail your Kalm Patch to our service department, see
Service
and W
arranty
.
or
Dispose of the Kalm Patch, see
Disposal and Environmental Protection
The stimulation is too weak.
The battery is low
.
Replace the battery
.
The patch does not adhere any longer
.
The patch is dried out.
Replace the patch.
8.2 Changing the patch
Replace the electrode patch when it is
dirty or worn.
1. Turn off the Kalm Patch.
2. Remove the electrode patch from the Kalm
Patch.
3. Place the new electrode patch on the Kalm
Patch.
8.3 Changing the battery
► Danger of poisoning
and suffocation!
Children could swallow batteries.
Keep batteries out of reach of chil-
dren.
► Do not throw batteries into fire.
► Only insert into the Kalm Patch bat-
teries in compliance with the speci-
fications listed in the “Technical
Data” section
► Do not attempt to recharge
the batteries!
Change the battery as described in the
“Inserting the battery” section.
