IBM Z9, Planning Manual

Page: 203 / 274

Cryptographic Characteristics
Use the Customize/Delete Activation Profiles task available from the CPC
Operational Customization tasks list to open a reset or image profile for an LP.
Note: Any changes to the Crypto Image Profile Page settings require a
DEACTIVATE and ACTIVATE of the LP to have the change take effect. To
verify the active settings for the Cryptographic characteristics use the View
LPAR Cryptographic Controls task available from the CPC Operational
Customization tasks list (For information regarding the View LPAR
Cryptographic Controls page, see “Reviewing Current Logical Partition
Cryptographic Controls” on page 5-6.)
Parameter Descriptions
Control domain index
The Control Domain Index identifies the Crypto domain index(es) that can
be administered from this logical partition being set up as the TCP/IP host
for the TKE Workstation. The Control Domain Index selected must also be
selected in the Usage Domain Index of the logical partitions to be managed
by the TKE Workstation.
If you are setting up the host TCP/IP in this logical partition for
communicating with the TKE Workstation, the partition will be used as a
Figure 3-27. Crypto Page, Image Profile
Chapter 3. Determining the Characteristics of Logical Partitions
3-77