IBM WebSphere DataPower 7198, Installation And User Manual

Page: 68 / 88

From the command line
Use the write memory command
2.
Perform a graceful shutdown by pressing the power button on the front of the
chassis. Because the appliance does not provide feedback of a graceful
shutdown, wait until the power LED is no longer illuminated.
Before proceeding, verify that the power LED is not illuminated.
Removing and replacing CRU parts
Replacement of Tier 1 CRU parts is your responsibility. If an IBM representative
installs a Tier 1 CRU part at your request, you will be charged for the installation.
Use the following hardware maintenance procedures to remove and replace a CRU
part when directed by IBM Support:
v
“Replacing a fan module” on page 49
v
“Replacing a power supply module” on page 51
v
“Replacing a hard disk drive module” on page 53
v
“Replacing an Ethernet module” on page 56
v “Removing an SFP transceiver” on page 58
48
Installation and User's Guide