IBM TSO/E REXX User Manual Download Page 82

Page: 82 / 242

Function

Description

SYMBOL

Returns this state of the symbol (variable, literal, or bad).

Conversion Functions

Function

Description

B2X

Returns a string, in character format, that represents the input binary
string converted to hexadecimal. (Binary to hexadecimal)

C2D

Returns the decimal value of the binary representation of the input
string. (Character to Decimal)

C2X

Returns a string, in character format, that represents the input string
converted to hexadecimal. (Character to Hexadecimal)

D2C

Returns a string, in character format, that represents the input decimal
number converted to binary. (Decimal to Character)

D2X

Returns a string, in character format, that represents the input decimal
number converted to hexadecimal. (Decimal to Hexadecimal)

X2B

Returns a string, in character format, that represents the input
hexadecimal string converted to binary. (Hexadecimal to binary)

X2C

Returns a string, in character format, that represents the input
hexadecimal string converted to character. (Hexadecimal to Character)

X2D

Returns the decimal representation of the input hexadecimal string.
(Hexadecimal to Decimal)

Formatting Functions

Function

Description

CENTER/
CENTRE

Returns a string of a specified length with the input string centered in it,
with pad characters added as necessary to make up the length.

COPIES

Returns the specified number of concatenated copies of the input string.

FORMAT

Returns the input number, rounded and formatted.

JUSTIFY *

Returns a specified string formatted by adding pad characters between
words to justify to both margins.

LEFT

Returns a string of the specified length, truncated or padded on the right
as needed.

RIGHT

Returns a string of the specified length, truncated or padded on the left
as needed.

SPACE

Returns the words in the input string with a specified number of pad
characters between each word.

* Indicates a non-SAA built-in function provided only by TSO/E.

String Manipulating Functions

Function

Description

ABBREV

Returns a string indicating if one string is equal to the specified number
of leading characters of another string.

DELSTR

Returns a string after deleting a specified number of characters, starting
at a specified point in the input string.

Built-In Functions

z/OS V1R1.0 TSO/E REXX User’s Guide

Summary of Contents for TSO/E REXX


















































































































































































































































Search results

Summary of Contents for TSO/E REXX

Reviews:

Related manuals for TSO/E REXX

Brands by name

Popular brands

IBM TSO/E REXX, User Manual

Search results

Summary of Contents for TSO/E REXX

Reviews:

Related manuals for TSO/E REXX

Brands by name

Popular brands