IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, User Manual, Page: 82 / 248

Table 20. ModifySharedPath command
Command Explanation Command Specific Options
ModifySharedPath
Modify share Name Explanation
--fsName <NAME>
File system name (taken
from "ListFileSystems"
output).
--shareName <NAME>
Shared path name (taken
from "ListSharedPaths"
output).
[--newShareName <NAME>] A new name for the shared
path.
[--enablement <STATUS>]
Share enablement status.
Valid values are enabled,
enabled.
[--allowedHosts
<IP,...,IP>]
Comma-delimited list of IP
addresses of the allowed
hosts, or 'all' if all hosts are
allowed.
[--userReadOnly
<NAME,...,NAME>] Comma-delimited list of
user names to be set "Read
Only" permission (taken
from "ListSambaUsers"
output).
[--userReadWrite
<NAME,...,NAME>]
Comma-delimited list of
user names to be set
"Read"mand "Write"
permissions (taken from
"ListSambaUsers" output).
Example:
ModifySharedPath
►► ./ptcli ModifySharedPath --ip 9.148.220.45 --loginFile h:\ptcli\ptadmin --fsName <NAME> Command Specific Options ►◄
Command Specific Options:
--shareName <NAME>
[--newShareName] <NAME> [--enablement] <STATUS>
►
► Command Specific Options
Command Specific Options:
[--allowedHosts] <IP,...,IP> [--userReadOnly] <NAME,...,NAME>
►
►
[--userReadWrite] <NAME,...,NAME>
62
IBM TS7650G Deduplication Gateway for ProtecTIER
®
: User's Guide for FSI Systems