IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, User Manual, Page: 77 / 248

Table 9. CreateFsiFileSystem command (continued)
Command Explanation Command Specific Options
Example:
CreateFsiFileSystem
►► ./ptcli CreateFsiFileSystem --ip 9.148.220.45 --loginFile h:\ptcli\ptadmin Command Specific Options ►◄
Command Specific Options:
--fsName <NAME> --size <GB>
Table 10. ModifyFsiFileSystem command
Command Explanation Command Specific Options
ModifyFsiFileSystem Modify file system
properties. Please provide
the name of the file system
to modify, and at least one
property to be modified. Name Explanation
--fsName <NAME> File system name (taken
from "ListFileSystems"
output).
[--newName <NAME>] The new (unique) name to
be set for the file system.
[--size <NUM>]
The new (unique) name to
be set for the file system.
[--size NUM] Maximum file
system size (in GB) to be
set.
[--hyperFactor <MODE>] The HyperFactor mode to
be set. Valid values are
enabled, disabled, baseline.
[--compression <TYPE>] The compression type to be
set. Valid values are
enabled, disabled.
Example:
ModifyFsiFileSystem
►► ./ptcli ModifyFsiFileSystem --ip 9.148.220.45 --loginFile h:\ptcli\ptadmin --fsName <NAME> Command Specific Options ►◄
Command Specific Options:
[--newName] <NAME> [--size] <NUM> [--hyperFactor] <MODE> [--compression] <MODE>
Table 11. ListFileSystems command
Command Explanation Command Specific Options
ListFileSystems Prints the list of file
systems on the server. Name Explanation
None
Chapter 8. Managing and monitoring ProtecTIER through the CLI
57