IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, User Manual, Page: 73 / 248

v “Server options” on page 54
v
“Commands” on page 54
Creating a profile
This topic describes how to create a profile in order to query the ProtecTIER server
through the command line interface (CLI) using
ptcli
.
About this task
Creating a profile is an optional task that can be completed prior to accessing the
ptcli. Creating a profile provides for the user name and password to be saved in
a file. You can always enter the user name and password manually if you choose
not to create a profile. For more information on using
ptcli , see “ptcli” on page
52.
Procedure
1. Activate
ptcli
with
-p
followed by a file name with full path.
2. Once prompted, enter the desired user name and password. This step creates
the user-specified file with the user name and password that is needed for
login.
Example
Note: In the following example, \ptcli is the root directory. Keep in mind that
running the command does not create the directory path. Therefore, for the
command to work, the root directory (in this case
\ptcli
) must be created before
activating the command.
ptcli -p h:\ptcli\ptuser
User name: ptuser
Password:
<?xml version="1.0" encoding="UTF-8"?
<response command="createprofile" status="success"/>
Processing options
This topic describes how to use the processing options to query the ProtecTIER
server through the command line interface (CLI).
Usage
You can specify the following processing options at the beginning of the command
string:
Table 3. Processing options
Processing options Explanation
--debug <debug level> Specify the debug level to print log messages to the
console. Choices for the debug level are as follows:
v SEVERE
v WARNING
v ALL
[-h (--help)] Prints the Help message to the console and exits.
[-v (--version] Prints the version information and exits.
Chapter 8. Managing and monitoring ProtecTIER through the CLI
53