IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, User Manual, Page: 155 / 248

Overall statistics
The Overall statistics pane displays the nominal throughput of backup and restore
streams in MiB/sec.
The Replication tab displays the nominal and physical throughput of incoming
and outgoing replication streams. The Backlog tab displays the nominal replication
backlog data per destination.
The Additional activities information pane displays information on the following:
Node the name of the ProtecTIER node and the IP address between parentheses.
File system
the name of the ProtecTIER File System.
Path the path where the file is saved.
Nominal size
the total nominal size of the files processed during the backup.
Host IP
the IP address of the host that sent the files to be backed up.
Monitoring the file system
This section describes how to use ProtecTIER Manager to monitor the overall file
system in ProtecTIER for FSI.
From the Systems Management view, select File System in the navigation pane.
The File System window displays the hierarchy of file systems configured on the
system.
The File Systems pane displays the following information per file system:
Table 37. File system properties
Properties Description
Name The file system name.
Configured max. size The maximum file system size defined
during file system creation.
Hyperfactor The data factoring mode status.
Compression Data compression is either enabled (on) or
disabled (off).
Figure 34. Additional activities information in FSI
Chapter 14. Monitoring ProtecTIER FSI
135