IBM TS4500 Introduction And Planning Manual Download Page 56

Page: 56 / 218

SCSI Medium Changer Device (tape library)

SCSI Sequential Access Device (tape drive)

The TS4500 tape library supports the Gigabit Ethernet interface in either auto

negotiation or fixed modes of 10 Mbps, 100 Mbps, and 1 Gbps using half or full

duplex. The TS4500 supports the following TCP/IP protocols:

IPv4 and IPv6 support

The TS4500 tape library supports internet protocol (IP) addresses in both

IPv4 and IPv6 format. Both the TS4500 integrated management console

(IMC) and the TS4500 management GUI allow the definition of IPv4 and

IPv6 addresses. The key proxy determines the IP version used and presents

the correct IP address and parameters to the IP Stack.

Simple Network Management Protocol (SNMP)

SNMP traps are supported for drive and library events. SNMP

management query functionality is supported by using a standard

Management Information Base (MIB).

Hyper Text Transfer Protocol (HTTP)

An embedded web server provides a web user interface for library

management and query capabilities.

Secure Socket Layer (SSL)

The TS4500 tape library supports SSL, a protocol for transmitting private

documents through the internet.

Proprietary command set for communicating with the IBM Encryption Key

Manager or IBM Security Lifecycle Key Manager (formerly the Tivoli Key

Lifecycle Manager)
Simple Mail Transfer Protocol (SMTP)

The TS4500 tape library supports SMTP for sending email alerts.

Network Time Protocol (NTP)

The TS4500 tape library supports NTP for external time-and-date

synchronization.

Lightweight Directory Access Protocol (LDAP)

The TS4500 tape library supports LDAP for centralized authentication.

Domain Name System (DNS)

The TS4500 tape library supports DNS for flexible IP addressing.

Fibre Channel interface

Several information resources are available to help users of drives that use a Fibre

Channel interface.

If the symbol is... It means...

Attention:

This product contains an assembly that complies with the

performance standards set by the United States Food and Drug

Administration for a Class One Laser Product. This laser assembly is

registered with the Department of Health and Human Services and is in

compliance with IEC825.

In the TS4500 tape library, for drives that use a Fibre Channel interface, the

following information is available:

IBM TS4500: Introduction and Planning Guide

Summary of Contents for TS4500



























































































































































































































Search results

Summary of Contents for TS4500

Reviews:

IBM TS4500, Introduction And Planning Manual, Page: 56 / 218

Search results

Summary of Contents for TS4500

Reviews: