IBM TotalStorage SAN256N Director 2045-N16, Installation And Maintenance Manual, Page: 90 / 157

SAN256N Director 2045-N16
70
TFTP Turbo
This software is required to download firmware code residing on the SAN256N director
workstation into an FC/9000 system. Install TFTP Turbo on each Enterprise Manager
Manager PC from which code will be loaded after the installation of the Enterprise
Manager.
Use the following procedure to install TFTP Turbo:
1. To install the software, use the installation CD-ROM labeled 5710637-001 S/W, CD,
REnterprise ManagerOTE LINK,FC9K.
2. Execute the setup program “tftpt_fs.exe”.
3. The Select Startup Type screen appears. Select No, I will start the service when I
need it.
4. After completion, go to the Control Panel and find the TFTP Turbo icon and double-
click it.
5. Change the default directory to where the SAN256N director Enterprise Manager is
installed.
Note: On existing/updated FC/9000 Enterprise Manager workstations, the default
directory is C:\Inrange\FC9000. On new SAN256N director installations, the
default directory is C:\Program Files\IBM\SAN256N.
6. Check mark Logged file transfers and location of log file to “C:\ftps.log”.
7. Click OK to accept the changes.
Starting and stopping TFTP
TFTP Turbo must be started prior to downloading code from the Enterprise Manager to
the SAN256N director. When the download is complete, TFTP Turbo should be stopped.
Stopping TFTP Turbo frees system resources for use by other programs.
1. Open the Control Panel by clicking the Windows Start button, pointing to Settings,
and then clicking Control Panel.
2. Double-click the Services icon.
3. Select the Weird Solutions TFTP Turbo service.
4. Click Start to start the service.
Return to this section to Stop the service when it is no longer need. This service is
automatically disabled when the PC is booted.