IBM TotalStorage SAN256N Director 2045-N16, Installation And Maintenance Manual, Page: 89 / 157

Chapter 4. Feature installation and configuration
69
1. From the Hosts main screen, right-click the Network, Cable, DSL host connection
and select Start Host.
2. The left most icon shows where pcAnywhere is waiting for a connection. If the
workstation has been rebooted prior to starting a communications session, this icon
should be displayed since the Launch with Windows option was selected.
Configure a remote Internet connection
Use the following procedure to configure TCP/IP connectivity to the remote workstation.
1. After starting pcAnywhere, select Remotes from the left navigation bar on the
pcAnywhere Manager screen.
2. Select and right-click Network, Cable, DSL from the Remotes Properties screen. A
drop-down menu opens, select Properties. The Remote Properties screen opens.
3. Select TCP/IP from the Device list, and Remote Control at the Connection Info tab.
4. Enter the Host IP address from the Settings tab.
5. Select pcAnywhere encoding from the Security Options tab. Click Apply.
This completes the Remote workstation configuration. You can now connect to the
Host workstation.
Establish a remote Internet connection
Use the following procedure to start a remote TCP/IP connection to the host
workstation.
1. From the Remote workstation, after starting pcAnywhere, observe the Remotes
Properties screen. Locate the field Network, Cable, DSL. You will see the device
connection (TCP/IP), Connect to Host IP address (xxx.xxx.xxx.xxx), and Start Mode
(Remote Control). Double-click on Network, Cable, DSL to connect to the Host
workstation.
A screen indicating a connection attempt to the Host workstation will appear.
2. When a connection is established, you will see a Host Login screen. Enter the
previously assigned (by IBM) User name and Password for the Host workstation.
Click OK to continue.
You will now see a pcAnywhere Session Manager screen with the Windows desktop
screen of the Host workstation shown in the Remote Control screen. From here you
have full control of the Host workstation.
3. Once a connection is established, the user can control the host PC. To do a file
transfer, select File Transfer from the Session Manager options on the left side of
the screen.
A screen will come up that displays the file structure of the remote and host
workstations. To transfer files using your mouse, left click the file and move it over to
the other screen.