IBM TotalStorage SAN256N Director 2045-N16, Installation And Maintenance Manual, Page: 146 / 157

SAN256N Director 2045-N16
126
Maintain a copy of HyperTerminal actions
1. Select Capture Text from the Transfer menu.
2. Enter a file name so that the file will be located in the C:\IBM\SAN256N directory with
a file name that will describe from which TCM module the capture is coming from and
include a date.
3. After the procedure has been completed using HyperTerminal, the capture must be
halted. To stop the capture select Stop from the Menu Bar:
Transfer | Capture Text | Stop
Note: Place a shortcut to SAN256N HyperTerminal connection on the Desktop by
performing a right button drag it off the menu to the Desktop for a shortcut and
selecting Copy Here.
4. Set the screen capture by selecting Capture Text from the Transfer menu.
5. Set the file destination to an adequate drive and format the name of the file
CompanyDateStamp_Sequence. Example: C:\IBM090100_1.txt.