IBM TotalStorage L10, Cli Reference Manual

Page: 73 / 96

Chapter 4. Show menu (root/show)
61
Note: HyperTerminal® users can capture the entire switch setting display by enabling
the text capture feature. To enable this feature, click Transfer > Capture Text and
designate the location and filename for the file. Once this feature is enabled,
proceed with the instructions above. When the system is finished downloading
the switch information, open the text file to view the settings.
Displaying SFP serial ID information (root/show/sid)
This command displays information (if available) about an inserted SFP transmitter for a
specific port.
To view the SF serial data for a specific port:
From the Show menu (root/show), type
sid <port number>
and press E
NTER
.
Displaying zone AL_PAs (root/show/zalpas)
This command displays AL_PAs for a single zone or for all zones.
To view the AL_PAs for all zones:
From the Show menu (root/show), type
zalpas
and press E
NTER
.
To view the AL_PAs for a specific zone:
From the Show menu (root/show), type
zalpas <zone number>
and press E
NTER
.