IBM TotalStorage L10, Cli Reference Manual

Page: 65 / 96

Chapter 3. Diagnostics menu (root/diag)
53
Displaying connected device information (root/diag/con)
This command displays the connected device information including the device ID,
connected port number, and Stealth settings for one or more ports.
To view device information for all ports:
From the Diagnostics menu (root/diag), type
con
and press E
NTER
.
To view device information for a specific port:
From the Diagnostics menu (root/diag), type
con <port number>
and press E
NTER
.
Displaying change notification information (root/diag/who)
Displays the port number from which the last change notification initiated.
To view the port:
From the Diagnostics menu (root/diag), type
who
and press E
NTER
.
Displaying initiator AL_PAs (root/diag/ialpa)
This command displays the AL_PAs that have been detected by the switch and identified
as initiators. Initiators are detected when a device is opened.
To view the initiator AL_PAs:
From the Diagnostics menu (root/diag), type
ialpa
and press E
NTER
.